REMEDIES FOR INDUSTRIAL PUMP AND EFFICIENCY

HOW TO REMOVE EVENTS IN EFFICIENT AND FAST INDUSTRIAL PUMP
In the process of using industrial pumps, it will inevitably operate improperly as well as lead to failures.

Industrial pumps are the first choice for pumping large volumes of water to serve manufacturing industries in industrial zones. However, in the process of using industrial pumps, it will inevitably operate improperly as well as lead to failures. Therefore, to help operate and troubleshoot industrial pumps quickly, you can refer to a number of troubleshooting methods of pumps below.

>>> Introduce types of petrol blocking documents

>>> Causes of petroleum losses in oil and gas enterprises

Industrial pumps are working but water is not up

The problem is often industrial pumps operating but water is not up

When the water is depleted, there is no water or the pump loses its priming water, resulting in the pump not getting up. The phenomenon of pump operation but not water up is one of the common errors in industrial pumps. To fix this error, the first step is to check the water source for water. At the same time need to check the mouth of the water inlet for any obstructions that are either clogged or not? If the above situations occur, it is necessary to promptly handle them so that the pump can operate normally.

Máy bơm công nghiệp bị dò rỉ điện

Problem of industrial pumps leaking electricity due to damaged insulation

Just like some types of diesel engines may experience oil leakage, industrial pumps can also experience electrical leakage. The main cause of this phenomenon is because the motor winding is damp, the water flowing in or the pump casing has damaged the insulation layer causing leakage. To handle this phenomenon, users need to pay attention to drying or repairing the wiring to avoid causing danger or fire the device.

 

Industrial pump has power on but it cannot work

 

Phenomenon of industrial pumps with electricity but cannot work

The phenomenon of electricity, but the pump is still not working is also one of the very common phenomenon. The main reason for this phenomenon is the weak supply voltage. It could also be due to a number of reasons: the capacitor, the winding is broken, the centrifugal pump wing is stuck or it may be due to the worn-out mechanical bearing or the dry grease. So the way to fix this problem is that you only need to increase the voltage or can conduct inspections, clean the capacitor instead, apply oil to the ball bearings, wrap the wires as the main solutions.

The above are the common mistakes when operating industrial pumps. These problems are not difficult to solve if you find the cause, the solution is very easy. The troubleshooting tips on the above pump will help you operate and use industrial pumps in the safest and most effective way. However, the best solution to troubleshooting is to choose the best pump accessories to replace.

OIL WHILE FRESH
Address: 42/25/34 Street No. 9, P. Bình Hưng Hòa, Binh Tan District, Ho Chi Minh City

Phone: (08) 3767.1868 - Fax: (08) 3767.1869

Hotline: 0948.456.467 - 0909.338.155 (Mr. Phong)

Email: 8L.petro75@gmail.com

Website: www.daukhibatquang.com